Mechanical Engineering

Faculty Achievement

S No. Faculty Name Achievement Type Description
1 Mr. Puneet Mangla Awards Received “Shreshtha Shikshak Puruskar” for year 2009-10 by SGI.
Awards Received “Gold Medal Production Engineering Divisional award” for paper published in journal of Institution of Engineers.
Awards Received “Silver Medal in National Taekwon-do championship.
Journals (SCI/SCOPUS) 1.  Title : “Analysis of various Ergonomic Hazards of Indian workers.” Paper published in Int. J. of Advances in Engineering Science and Technology, Vol. 05, Issue 1, 2016, 28-32.
Journals (SCI/SCOPUS) 2.  Title : “Inventory Management Performance In  MSMEs : What Factors Do    Influence Them?” Paper published in Int. J. of Advance Manufacturing System, Volume 15, Issue 2, Year 2015 (Part 5) (A Journal of Int. Society of Productivity Enhancement, USA).
Journals (SCI/SCOPUS) 3. Title : “Factors Influencing the Information Technology Adoption of Micro, Small and  Medium Enterprises (MSME) : An Empirical Study.” Paper published in Int. J. of Advance Manufacturing System, Volume 15, Issue 2, Year 2015 (Part 11) (A Journal of Int. Society of Productivity Enhancement, USA). 
Journals (SCI/SCOPUS) 4. Title : “Impact Analysis of MINI BAJA Vehicle Role Cage using Finite Element Analysis.” 
Journals (SCI/SCOPUS) Paper published in Int. J. of Applied Engineering Research, Vol. 6, Number 23-24 (2011), pp. 2595-2600. November 2011.
Journals (SCI/SCOPUS)  Title: “Group Technology Cell Formation with Competitive Nets and Kohonen Maps.” Paper published in National Journal of Computer Society of India. December 1997.
Journals (SCI/SCOPUS) Title: “Cutting Force Estimation with Artificial Neural Network Models.” 
2 Dr. Sandeep Agrawal Journals (SCI/SCOPUS) Sandeep Agrawal ,K.K.Singh , P.K.Sarkar  [2018], Comparative investigation on the wear and friction behaviors of carbon fiber reinforced polymer composites under dry sliding, oil lubrication and inert gas environment, Materials Today: Proceedings 5(1), 1250-1256, (2018) Elsevier (SCOPUS) (Citation 2).
Journals (SCI/SCOPUS) Sandeep Agrawal , K.K.Singh , P.K.Sarkar  [2016], A comparative study of wear and friction characteristics of glass fibre reinforced epoxy resin, sliding under dry,oil-lubricated and inert gas environments, Tribology International 96 (2016) 217–224 Elsevier, (Thomson Reuters Impact factor:  2.257) (Citation 25).
Journals (SCI/SCOPUS) Sandeep Agrawal, Kalyan Kumar Singh, PK Sarkar. [2014] Impact damage on fibre-reinforced polymer matrix composite – A review. Journal of Composite Materials .Editor-in-Chief: Prof H. Thomas Hahn, UCLA, USA, (SAGE Journals)(Thomson Reuters Impact factor:  1.257)(Citation 101).
Journals (SCI/SCOPUS) Nishant Singh, Sandeep Agrawal, Dilip johari, Yashvir Singh, Predictive analysis of surface roughness in argon-assisted EDM using semiempirical and ANN techniques. SN Applied Sciences A Springer Nature journal (2019) 1:995 ISSN: 2523-3971
Journals (SCI/SCOPUS) Nishant Kumar Singh, Sandeep Agrawal, [2018], Experimental investigation of process parameters in nitrogen assisted EDM of En 19 steel. International Journal of Applied Engineering Research ISSN 0973-4562 13, 165-169 (SCOPUS).
Journals (SCI/SCOPUS) Nishant Kumar Singh, Sandeep Agrawal, , Rajvardhan[2018]. Experimental Study and Parameter Optimization of Hybrid Electrical Discharge Machining. International Journal of Engineering &Technology 7, 1161-1167 (SCOPUS).
Journals (SCI/SCOPUS) Anurag bajpai, Sandeep Agrawal, Suruchi. Mechanical Properties of Epoxy Resin Based Polymer Concrete, International Journal of Mechanical Engineering and Technology (IJMET), ISSN 0976 –6340(Print), ISSN 0976 – 6359(Online) Volume 3, Issue 1, January- April (2012), pp. 267-276 Journal Impact Factor (2011): 1.2083 (Calculated by GISI).
3 Mr. Kapil Gupta Journals (SCI/SCOPUS)  K. Gupta, Rahul Chhibber, “Mechanical Properties of Bimetallic Weld” in the Proc. Of National Conference on Emerging Vistas of Mechanical engineering (EVME-2011) held on 04-05 April, 2011 at Anand Engineering College, Agra.
Journals (SCI/SCOPUS) K. Gupta, Rahul Chhibber, B.K. Dutta , “Structural health monitoring of bimetallic welds at elevated temperature”, , Proc of 21st International Conference on Structural Mechanics in Reactor Technology (SMiRT 21), New Delhi, , 2011,pp.2581-2589
Journals (SCI/SCOPUS) K. Gupta, Rahul Chhibber “Structural Integrity of Bimetallic weld at elevated temperature” in International Journal of Mechanical Engineering and Technology. Volume 3, Issue 1, January- April (2012), pp. 235-243
4 Mr. Anand Poras Journals (SCI/SCOPUS) “Electrical Discharge Drilling of D3 Die Steel using Air Assisted Rotary Tubular Electrode”, Materials Today: proceedings Elsevier, Volume 5, Issue 2, Part 1, 2018, Page No 4392-4401. 
Journals (SCI/SCOPUS) “Comparison of Gas Assisted Hybrid EDM, Rotary EDM and Conventional EDM Processing of High Carbon  High Chromium Die Steel” International Journal of Engineering & Technology, Volume 7, No 3.12 (2018), Page No 1154-1160
Journals (SCI/SCOPUS) Trainer - Rubber Technologist, (Rubber Skill Development Council) 
5 Mr. Ashok Kumar Verma Awards Best teacher Award 2008-09 of Sharda group of institutions.
Awards Won the First Prize for best article in “Shivaji University Inter-Collage Annual magazine Competition”
Awards Appreciation letter by Director HCST for best result.
Awards Best Technical article in college annual magazine.
5 Dr. Nishant K. Singh Journals (SCI/SCOPUS) Nishant K. Singh, Pulak M. Pandey, K.K. Singh EDM with air assisted multi-hole rotating tool” Journal of Materials and Manufacturing Process (Taylor and Francis), DOI:10.1080/10426914.2015.1127954
Journals (SCI/SCOPUS) Nishant K. Singh, Pulak M. Pandey, K.K. SinghExperimental Investigation and Analysis of Argon Assisted Perforated Electrodes” Journal of Materials and Manufacturing Process (Taylor and Francis), DOI: 10.1080/10426914.2016.1221079
Journals (SCI/SCOPUS) Yahvir Singh, Nishant K. Singh Dirt analysis on the performance of an engine cooling system” Journal of Energy in Southern Africa. Vol. 24 No 4. November 2013
Journals (SCI/SCOPUS) Yashvir Singh, Ashish Kumar Pandey, Nishant Kumar Singh, Abhishek Sharma, Abid Farooq Sustainability of polanga oil based blended lubricant at different load and sliding distance, Energy source part A: Recovery, Utilization, and Environmental Effects (Taylor and Francis), Vol. 39, No. 19, 1970-1977
Journals (SCI/SCOPUS) Nishant K. Singh, Pulak M. Pandey, K.K. Singh, Manish Sharma Steps towards green manufacturing through EDM process: A review” Journal of Cogent Engineering (Taylor and Francis), DOI: 10.1080/23311916.2016.1272662
Journals (SCI/SCOPUS) Nishant K Singh Anand PorasElectrical Discharge Drilling of D3 Die Steel using Air Assisted Rotary Tubular Electrode” Published in Materials Today: proceedings XX (2017), Elsevier (Scopus), March, 2017.
Journals (SCI/SCOPUS) Nishant K Singh, Yashvir Singh Experimental Investigation and Modeling of Surface Finish in Argon-Assisted Electrical Discharge Machining Using Dimensional Analysis. Arabian Journal for Science and Engineering, pp. 1-12.
Journals (SCI/SCOPUS) Nishant K Singh , R Prasad, Dilip Johari Electrical Discharge Drilling of Al-SiC Composite using Air Assisted Rotary Tubular Electrode” accepted in Materials Today: proceedings XX (2017), Elsevier (Scopus), 2017
Journals (SCI/SCOPUS) Nishant K Singh, Pulak M Pandey, KK Singh A semi-empirical model to predict material removal rate during air-assisted electrical discharge machining, Journal of the Brazilian Society of Mechanical Sciences and Engineering Vol 41 (3) pp. 122
Book Chapter Book Chapter DESIGN OF VAR SYSTEM USING WASTE HEAT RECOVERY OF DIESEL GENSET, LAMBERT, Academic Publishing. ISBN- 978-3-8443-1803-6
Book Chapter Book Chapter Performance Study of Gas-Assisted Electric Discharge Machining on Carbon–Chromium Die Steel, Advances in Industrial and Production Engineering (Springer Nature),  DOI: 10.1007/978-981-13-6412-9_74
Book Chapter Book Chapter Heat Transfer and Friction Characteristics of an Artificially Roughened Solar Air Heater, Advances in Fluid and Thermal Engineering, Springer Nature DOI: 10.1007/978-981-13-6416-7_57
7 Mr. R. Prasad Patent Patent: Application No. 201921021839 Present invention relates to an apparatus for heat hardening of iron pellets. Furthermore, the invention also relates to a process for heat hardening of iron pellets in the apparatus of the invention
Journals (SCI/SCOPUS) Award Best Third Paper in 17th International Seminar on Mineral Processing Technology(MPT-2018),October 2018,IIT(ISM) Dhanbad
Journals (SCI/SCOPUS) R.Prasad, Kapil Gupta ,Mahesh Dhakar ,Naresh Kumar , “Study of Surface Morphology & Crystallography Of Iron Ore Pellets”, Journal of Metallurgy and Materials Science 2019 
Journals (SCI/SCOPUS) R. Prasad, N K Singh , D johari ,D Singh , A Sharma, “An Experimental and Statistical Analysis of Double Slope Single Basin Solar Still in Active and Passive Mode with Different Water Depth” Int. J.Materials  Todays
Journals (SCI/SCOPUS) R. Prasad, A S Yadav, N K Singh,D Johari, “Heat Transfer and Friction Characteristics of an Artificially Roughened Solar Air Heater” Advances In Fluid And Thermal Engg”(2018)DOI:10.1007/978-981-13-6416-7;ISBN978-981-13-6416-7;ISSN:2195-4356
Journals (SCI/SCOPUS) N K Singh, R. Prasad, Y. Singh , D Johari, “Performance Study Of Gas Assisted Electric Discharge Machining On Carbon-Chromium Die Steel” Advances in Industrial and Production Engg.(2018)DOI:10.1007/978-981-13-6412-9;ISSN2195-4356;ISBN:978-981-13-6411-2
Journals (SCI/SCOPUS) Nishant K.Singh,R.Prasad,DilipJohari “Electrical Discharge Drilling of Al-Sic Composite Using Air Assisted Rotary Tubular Electrode” Int. J.Materials  Todays  ,Volume 5, Issue 11, Part 3, (2018), Pages 23769-23778
Journals (SCI/SCOPUS)  Yashvir Singh, Nishant Kr. Singh, R. Prasad, Hemant Kr. Nayak “Performance Analysis Of Supercharging Of Two Wheelers”, International Journal of Mechanical Engineering and Technology (IJMET), ISSN 0976 – 6340(Print) ISSN 0976 – 6359 Volume 2 Issue 2, (2011), pp. 63-69
Award Best Third Paper in 17th International Seminar on Mineral Processing Technology(MPT-2018),October 2018,IIT(ISM) Dhanbad
8 Mr. Dilip Johri Journals (SCI/SCOPUS) Paper titled, “Electrical Discharge Drilling of Al-Sic Composite Using Air Assisted Rotary Tubular Electrode” has been published in International Journal of Materials Today Volume 5, Issue 11, Part 3, 2018, Pages 23769-23778
Journals (SCI/SCOPUS) Paper titled, “Analysis of various Ergonomic Hazards of Indian workers”, has been published in January 2016 in the International Journal of advances in Engineering Science and Technology, Volume 5, Number 1, 2016, 28-32. ISSN: 2319-1112
Journals (SCI/SCOPUS) Paper titled, “Design of an Ecofriendly Air conditioning system using Evacuated tube solar”, has been published in August 2013 in International Journal, of Environmental Research and Development, Volume 3, Number 8, 2013, 83-88. ISSN 2249-3131.
Journals (SCI/SCOPUS) Paper titled, “Effect of variation in tilt angle on the performance of a solar water heater using evacuated tube solar collector”, has been published in March 2013 special issue of the  International Journal, of Applied Engineering Research, Volume 8, Number 3, 2013, 37-40. ISSN 0973-4562.
9 Mr. Rajvardhan Journals (SCI/SCOPUS) Experimental study and parameter optimization of hybrid electrical discharge machining “international journal of engineering and technology 7(3.12)(2018)1161-1167
10 Mr. Shailendra Kumar Chaurasia Journals (SCI/SCOPUS) Shailendra Chaurasia ,Nishant K. Singh , Rakesh Prasad , Puneet Mangla , “Influence of Flushing Techniques on EDM Performance